A stylish chimney solution that is easy to install. The steel chimney can withstand large temperature fluctuations and is intended for use primarily in separate sauna buildings with trap stoves, smaller fireplaces and fireplace pipes.
The steel chimney starter pack contains: a 1.5 m steel chimney (WHP1500) and a box of accessories including a 1.0 m uninsulated flue pipe, a rain cap, a rubber rain cap and rain cap mounting kit, a stainless steel duct cap and a steel chimney duct insulation and safety cap. The steel chimney can be easily extended with 0,5 (WHP500) and 1,0 (WHP1000) meter long accessories. Thanks to an ingenious mechanism, the accessories are screwed together and the flue tubes are also interlocked thanks to grooves in the tube. This prevents movement due to temperature variations. Indoors, the chimney can be installed at a height of 3 metres without support, and outdoors at 2 metres.
The nominal flue gas temperature of a Harvia steel flue connected to a Harvia steel flue shall not exceed. 600 ºC. The outer diameter of the steel flue is 220 mm and the diameter of the flue pipe is 115 mm. The safety distance of the steel stack from combustible materials is 100 mm. The Harvia steel grate is CE-marked and therefore complies with international fire and safety requirements. The steel chimney is soot-resistant.
Carefully read the instructions for installation and use of the steel basket and the connected heater.
Colour: Steel
Width (mm): 220
Height (mm): 1500
Smoke opening diameter (mm): 115
